Werbung
Wireless USB Manager:
The Wireless USB Manager is used to confi gure your wireless USB connection. The program displays the USB devices that are
connected, their current status and the signal strength.
Colour of the WUSB program icon
Opening the Wireless USB Manager:
Right-click the Manager's icon in the task bar/system tray.
Select the WUSB connections option.
Status
Connected (green icon)
The wireless connection was successfully established.
Wireless USB host dongle is active (red icon)
The wireless USB host dongle has been connected to the computer/laptop and is de-
tected. However, there is currently no active connection.
Wireless USB host dongle is deactivated (grey icon)
The wireless USB host dongle has either been deactivated in the Wireless USB Manager
or it has not been connected with your computer.
or:
The operating system did not detect the wireless USB host dongle. Remove the dongle and
plug it in again after about 5 seconds.
If this does not solve the problem, re-install the wireless USB software.
Wireless USB connection is active: (green icon with yellow exclamation mark)
A connection is currently being used but has poor signal quality.
Check the locations of your computer/laptop and the wireless USB kit's docking station.
Notes:
Be sure that there are no walls, doors or similar between the devices.
The range is limited to about 10 to 20 metres.
Wireless USB connection is not available: (red icon with yellow exclamation mark)
No active connection was detected.
Check to be sure that the wireless USB kit's docking station is in range.
19
Werbung
