Belkin F5U508 Benutzerhandbuch Seite 10

P73954ec-A-F5U508-man.qxd 22-11-2002 15:41 Page 6
8. When Windows restarts, the PCI card will be detected and
installation of the required drivers will begin.
Note: Depending on the speed of your computer, it may
take up to 30 seconds for the PCI card to be detected.
9. Windows will detect the "PCI Standard PCI to PCI Bridge"
and the "Add New Hardware Wizard" dialog box will open.
Click "Next".
10. Select "Search for the best driver for your device" and
click "Next".
11. Uncheck all the boxes and click "Next".
12. Windows will locate the drivers for "PCI Standard PCI to
PCI Bridge". Click "Next".
(Windows may prompt you to insert the Windows OS
installation CD. If so, insert the CD into the CD-ROM drive
and continue the installation procedure).
13. Installation of the "PCI Standard PCI to PCI Bridge" will now
complete. Click "Finish".
14. Windows will detect the "NEC Firewarden OHCI Compliant
IEEE 1394 Host Controller". Click "Next".
15. Select "Search for the best driver for your device" and
click "Next".
16. Uncheck all the boxes and click "Next".
17. Windows will now search its driver database for the required
driver. Click "Next".
18. Installation of the "NEC Firewarden OHCI Compliant IEEE
1394 Host Controller" is now complete. Click "Finish".
Installation (continued)
6