Turning The Power On/Off; Auto Power Off Function - Sharp PW-E310 Bedienungsanleitung

Turning the power on/off

The power can be switched on by pressing the keys listed below.
To turn off the power, press o.
Key
o
Restores the display as it was before the unit was switched off
(Resume function).
m
The main menu screen appears.
t
The main display of each dictionary and/or function appears (Direct-
u
on function).
t
a
k

Auto power off function

To save the battery, the PW-E310 will automatically turn its power off if no key
operations are detected for a set period of time. The activation interval initial setting
is 5 minutes, but it can be adjusted by following the directions on page E-12.
To attach a commercially available strap
A carrying strap can be attached, as shown in the picture below.
Caution:
• Do not swing the unit by the strap, or use excessive
force to pull the strap. Doing so will cause a
malfunction or hardware damage to the unit.
E-4
Display status upon start-up
Back of the unit
Key notation used in this manual
• All keys are framed (A, for instance); exceptions are found in the Calculator
section, where the numeral entries are shown with real numbers.
• Keys are often assigned with more than one function. The appropriate key/
function will be shown according to the input status.
<Example 1>
will be shown as either 'Q', '1' or '1' depending on the input status.
<Example 2>
will be shown as either 'G' or '+' depending on the input status.
• The functions indicated with green typeface are second functions. Press and
release ^, then press an appropriate key.
<Example 1>
^ ? directs to press and release ^, then press ? (M).
^ w directs to press and release ^, then press w (<).