G&D NEO-FiberLink-2 Installationsanleitung Seite 20

Safety instructions
Special advices for dealing with laser technology
The devices of the NEO-FiberLink-2 series use components with laser technology
which comply with laser class 1 or better.
They meet the requirements according to
and 1040.11 .
Class 1 Laser Product
EN 60825-1:2014
Mind the following advices when dealing with laser beams:
! Avoid direct eye exposure to beam
Never stare directly into the beam when wearing optical instruments!
! Always connect optical connections or cover them with protection caps
Always cover the optical connections of the Transmission socket and the cable
plugs with a connector or a protection cap.
! Only use G&D certified transmission modules
It is not permitted to use fibre optic modules, which do not meet the requirements
of laser class 1 in accordance to
compliance with regulations and advices for the safe handling of laser technol-
ogy cannot be guaranteed.
The guarantee of complying with all relevant instructions can only be given by
applying original components. Therefore, the devices have to be operated with
G&D certified transmission modules only.
2 · NEO-FiberLink-2
EN 60825-1:2014
Invisible laser beam, avoid
direct eye exposure with opti-
cal instruments
EN 60825-1:2014
as well as U.S. CFR 1040.10
Complies with 21 CFR
1040.10 and 1040.11
. By using such modules, the