Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
T22
Nominal torque M
Nominal torque M
nom
nom
for reference only
for reference only
Degree of protection to
EN 60529
Nominal temperature range
Operating temperature
range
Storage temperature range
Impact resistance, test
severity level according to
DIN IEC 68; Part 2-27;
IEC 68-2-27-1987
Number
Duration
Acceleration (half-sine)
Vibration resistance, test
severity level according to
DIN IEC 68, Part 2-6: IEC
68-2-6-1982
Frequency range
Duration
Acceleration (amplitude)
Nominal (rated) rotational
speed n
nom
3)
Load limits
Limit torque, related to M
Breaking torque, rel. to M
Longitudinal limit force
Lateral limit force
Bending limit moment
Oscillation width per
DIN 50100 (peak to peak)
3)
Each type of irregular stress (bending moment, lateral or axial load, exceeding nominal torque) can only
be permitted up to its specified limit value provided none of the others can occur at the same time. If this
condition is not met, the limit values must be reduced. If 30 % of the bending limit moment and lateral
force limit occur at the same time, only 40 % of the longitudinal limit force is permissible and nominal
torque must not be exceeded. The permissible bending moments, axial forces and lateral forces can
affect the measurement result by approx. 1 % of nominal torque.
4)
Nominal torque must not be exceeded.
5)
Please adhere to the maximum torque (T
A2302-2.0 en/de
N⋅m
5
ft-lb
3.75
°
°F
C [
]
°
°F
C [
]
°
°F
C [
]
n
ms
2
m/s
Hz
h
2
m/s
rpm
%
nom
%
nom
kN
0.9
N
25
N@m
0.5
4)
%
) of the couplings.
max
10
20
50
7.5
15
37.5
IP40
+5...+45 [41...113]
0...+60 [32...140]
−5...+70 [23...158]
1000
3
650
5...65
1.5
50
16 000
12 000
200
> 280
0.9
0.9
1.6
45
90
210
0.9
1.9
5.5
80
100
200
500
1000
75
150
375
9 000
5)
1.6
1.6
4
420
850
1400 2800
11
22
54
17
700
4
109
HBM
Werbung
Kapitel
Inhaltsverzeichnis
