Inhaltsverzeichnis
Werbung
5.3
Beispiel-Einstellung PROPROG wt II Projekt Variablen
5.3
Beispiel-Einstellung PROPROG wt II Projekt Variablen
Inhalt des globalen Variablen-Arbeitsblattes "bmaXX_Variables":
(* Conf= CONF1 , Res= RES1 *)
(* Generated by system configurator tool. Do not modify ! *)
(* Automatisch generierter Code. Nicht manuell ändern ! *)
VAR_GLOBAL
(* -- BM4000 device -- )
<BM4Dev><Name>RES1</Name><ArtNr>350267</ArtNr><A>350324</A><B>0</B><C>0</
C><D>0</D><E>0</E><F>362779</F><G>369656</G><H>365845</H><J>0</J><K>0</K><L>0</
L><M>0</M></BM4Dev>
( -- End BM4000 device -- *)
(* -- BM4000 device Slot G -- *)
(* -- Profibus -- *)
(* Slot G: Profibus Slave Module "OM_G" *)
us_PBS_G_Station
us_PBS_G_Baudrate AT %MB3.2001798 : USINT := 0; (* 0=auto *)
u_PBS_G_VarTableVersion AT %MW3.2001984 : UINT := 100;
w_PBS_G_Var1_ModuleID
w_PBS_G_Var1_ModuleID2
u_PBS_G_Var1_Start
u_PBS_G_Var1_Number
w_PBS_G_Var2_ModuleID
w_PBS_G_Var2_ModuleID2
u_PBS_G_Var2_Start
u_PBS_G_Var2_Number
w_PBS_G_Var3_ModuleID
w_PBS_G_Var3_ModuleID2
u_PBS_G_Var3_Start
u_PBS_G_Var3_Number
w_PBS_G_Var4_ModuleID
w_PBS_G_Var4_ModuleID2
u_PBS_G_Var4_Start
u_PBS_G_Var4_Number
76
Applikationshandbuch Optionsmodul PROFIBUS-DP-Slave für b maXX PLC BM4-O-PRO-01
Dokument-Nr.: 5.03058.03
von 88
AT %MB3.2001796 : USINT := 6; (* 1..125 *)
AT %MW3.2001988 : WORD := 16#42c1;
AT %MW3.2001990 : WORD := 16#0200;
AT %MW3.2001992 : UINT := 2560;
AT %MW3.2001994 : UINT := 1;
AT %MW3.2001996 : WORD := 16#42c1;
AT %MW3.2001998 : WORD := 16#0201;
AT %MW3.2002000 : UINT := 2564;
AT %MW3.2002002 : UINT := 1;
AT %MW3.2002004 : WORD := 16#82c1;
AT %MW3.2002006 : WORD := 16#0202;
AT %MW3.2002008 : UINT := 2568;
AT %MW3.2002010 : UINT := 1;
AT %MW3.2002012 : WORD := 16#82c0;
AT %MW3.2002014 : WORD := 16#0103;
AT %MW3.2002016 : UINT := 2572;
AT %MW3.2002018 : UINT := 1;
Baumüller Nürnberg GmbH
Werbung
Kapitel
Inhaltsverzeichnis
