Totalization; Display Stored Weighing Data; Delete The Saved Weighing Data - KERN VHE-A Betriebsanleitung

8.6 Totalization

The display unit offers an option that allows the addition of weighing values and the
display of the total weight.
 Pick up the load and bring it to reference height
 Press
. The value is stored and „M" is
displayed.
The display alternately shows the consecutive
number (number of weighings) and the total weight.
After a few seconds the system automatically reverts
to standard weighing mode.
 Add-up another load as described before. Observe
that the system must be unloaded between the
weighing procedures.

8.7 Display stored weighing data

 Press
and the total weight are displayed alternately

8.8 Delete the saved weighing data

 During display of the weighing data press
are deleted, the display changes automatically into weighing mode and the
„M" extinguishes.
20
for approx. 3 sec, the number of weighing procedures
(example)
Number of weighing
procedures
Total weight
shortly, data in the store
VHE-A-BA-e-1411