Zero Point Correction; Taring - KERN VHE-A Betriebsanleitung

8.4 Zero point correction

 Switch on pallet truck scale using
 Check whether the forks of the pallet truck scale are
empty
 Lift pallet truck scale till to the reference height (see
chap. 8, fig. 1).
 If the display does not show zero, reset display using

8.5 Taring

 Lift weighing container till to the reference height (see chap. 8, fig. 1).
 Switch on pallet truck scale using
The weight of the weighing container is displayed.
 Tare using
 Fill material to be weighed in the container, the net
weight is displayed.
 If the container is removed from the balance, the tare
weight is displayed as a negative value. The tare
weight remains stored until the
pressed anew or the balance is switched off.
VHE-A-BA-e-1411
button.
button is
button.
button.
19