Scanning For Fm Stations; Scan Setting; Audio Mode; Saving A Fm Station As Favourite - Albrecht DR 65 C Bedienungsanleitung

6.1.2. Scanning for FM Stations

Pressing the Scan button starts the automatic search for the next available station. The direction of
the scan can be changed by manually tuning in the desired direction firstly.

6.2. Scan Setting

1. Press and hold the Menu/Info button to enter the menu options.
2. Select <Scan setting> and confirm with OK.
There are two different options to choose from:
The currently selected Scan setting is marked with a '*'.
• Strong stations - The scan will only stop when a strong signal strength is received which should
also result in a better audio quality. It is possible that the station you are scanning for may be
missed using this option.
• All stations - The scan will stop for every station it receives, even if the signal strength is poor.
3. Select your desired option and confirm with OK.

6.3. Audio Mode

The radio will automatically switch between Stereo and Mono, depending on the quality of the signal
being received but you can override this function and manually switch between 'Forced Mono' and
'Stereo Allowed'.
NOTE: As this is a Mono radio, you may wish to only select the 'Stereo Allowed' option if you are
listening to your radio using headphones.
1. Press and hold the Menu/Info button to enter the menu.
2. Select <Audio setting> and confirm with OK.
3. You can choose between <Forced mono> and <Stereo allowed>. The currently selected setting
is marked with a '*'.
4. Select your desired option and confirm with OK.

6.4. Saving a FM station as Favourite

Your radio can store up to 10 FM radio stations in its preset memories for instant access to your
favourite stations.
1. Tune the Radio to the FM radio station that you wish to save.
2. Press and hold the Favourite button for approximately 2 seconds until Preset Store <1:(Empty)>
is displayed if no previous station has been stored.
3. You can select your desired memory by using the rotary knob.
4. Press and release the OK button to confirm. Preset X stored, where 'X' is the number of the
selected memory (1-10), will be displayed.
NOTE: If the selected memory is already occupied by a different FM radio station, it will be overwrit-
ten when you store the new station.

6.5. Recalling a Favourite Station

1. Press and release the Favourite button. Preset Recall <1:> is displayed together with the name
of the stored station, or (Empty) if no station has been stored.
2. Select the desired station by using the rotary knob.
3. Press and release the OK button to confirm. The radio will instantly tune to that station and
begin to play.
English 25