Inhaltsverzeichnis
Werbung
CE / FCC Deklaration, Recycling
CE Declaration of Conformity
B.M.C. AUDIO GmbH declares that this product is in conformance with the Low Voltage Directive 73/23/EEC
and Electromagnetic Compatibility 89/336/EEC as amended by 92/31/EEC and 93/68/EEC.
The conformity of this product with the regulations of Directive number 73/23/EEC (LVD) is proved by full
compliance with the following standards:
Standard number
Date of issue
EN60065
2002
The conformity of this product with the regulations of Directive number 89/336/EEC (EMC) is proved by full
compliance with the following standards:
Standard number
Date of issue
EN55013
2001
EN55013
2001
EN55020
2002
FCC notice
Note: This equipment has been tested and found to comply with the limits for Class B devices, according to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause interference to radio
communications. There is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Connect this unit to a different outlet than the receiver.
Relocate or reorient the receiving antenna.
Increase space between this equipment and receiver.
Consult your dealer or an experienced radio/TV technician.
Waste Electrical and Electronic Equipment (WEEE) Directive
Waste Electrical and Electronic Equipment Directive Directive 2002/96/EC of the European Parliament and of
the Council.
The bin symbol is shown on this product. It indicates that the product should not be disposed of with regular
household waste, but should be disposed of separately.
Electrical and electronic equipment may contain materials that are hazardous to the environment or human
health and therefore should be disposed of at a designated waste facility or returned to your retailer for
appropriate recycling.
If you wish to dispose of this unit and it still functions, please consider recycling/reusing it by selling it, trading it
in at your dealer for new equipment, giving it away to friends or donating it to a charity shop.
Test type
General requirements
Marking
Hazardous radiation
Heating under normal conditions
Shock hazards under normal
operating conditions
Insulation requirements
Fault conditions
Mechanical strength
Parts connected to the mains supply
Components
Terminal devices
External flexible cords
Electrical connections and mechanical fixings
Protection against electric shock
Stability and mechanical hazards
Resistance to fire
Test type
Conducted emissions
Absorbed emissions
Immunity
Bedienung Rückseite
RIGHT SPEAKER
RIGHT CHANNEL
INPUT
XLR-1
XLR-2
RCA-1
RCA-2
RCA-3
SERIAL NO.:
Netzspannungs-Versorgung
➀ AC LINE
Anschluß für die Netzleitung
Stellen Sie sicher, dass die Landesnetzspannung mit der auf dem Gerät
angegebenen Spannung überein stimmt.
Eingänge (nur für analoge Geräte)
➁ XLR 1, XLR 2
Symmetrische 47 kOhm XLR-Eingänge
Im CI-Modus wird die Last erheblich höher und der einwandfreie Betrieb nur für
B.M.C.-Geräte garantiert.
➂ RCA1, RCA2, RCA3
Asymmetrische 47 kOhm RCA-Eingänge
Ausgänge
➃ SPEAKER
Anschlüsse für Lautsprecher mit einer Impedanz von 4-8 Ohm
B.M.C. Link
➄ OPTO CONTROL IN / LOOP OUT
Optische Kontroll-Verbindung zu einem B.M.C. DAC
(LOOP OUT zur eventuellen Weiterleitung an weitere B.M.C.-Verstärker)
CS2 STEREO POWER AMPLIFIER
OPTO CONTROL
LEFT CHANNEL
LEFT SPEAKER
LOOP
IN
OUT
INPUT
XLR-1
XLR-2
PHASE
AC POWER
50/60Hz
WEEE - Reg. - Nr.:
RCA-1
RCA-2
RCA-3
DE18339144
B.M.C. AUDIO
MADE BY B.M.C. GERMANY
Werbung
Inhaltsverzeichnis
