Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Setting the flight number:
(1)
Press SEL button (B) to enter the select mode.
(2)
Rotate (E) until AI is displayed.
(3)
Push (F) to switch to FN. The cursor is set on the first character.
(4)
Rotate (E) to change this character.
(5)
Push (F) to set the cursor to the next character.
(6)
Repeat steps 4 and 5 until the flight number is entered.
(7)
If the flight number consists of less than 7 characters, put a space at the end
to fill the remaining characters with spaces.
(8)
Store the changes with STO button (C). For leaving the setting procedure
without storing, push the SEL button (B).
NOTE:
Aircraft Identifier / Flight Number consists of max. 7 characters (on the left-hand side
oriented). No dashes or spaces shall be included. If the FN consists of less than 7
characters, the remaining characters on the right side shall be filled with spaces.
Switching back to default AI:
(1)
Press SEL button (B) to enter the select mode.
(2)
Rotate (E) to the indication FN=XXXXXXXX.
(3)
First push on (F) indicates "FN=AI DEF" (inverted).
(4)
Can be set to AI=DEF with STO button (C).
Changing the flight number:
(1)
Press SEL button (B).
(2)
Rotate (E) until FN is displayed.
(3)
Push (F) twice to enter the FN editing mode.
(4)
Change the FN as described above.
Bedienung/Operation BXP6403-X-(XX)
Seite/Page 30 von/of 40
Werbung
Inhaltsverzeichnis
