Neato Robotics botvac Schnellstartanleitung Seite 8

Preparation and Set Up
(continued)
Charge Robot
4
Place the rounded side of your Neato robot
against the metal charging contacts on the
charge base.
Charging
Contacts
NOTE
The robot wakes up in two steps
1) The Lights turn on in about 5 seconds and
2) The LCD turns on about 15 seconds later.
Before using for the first time, charge your
Neato robot fully until both robot status lights
are solid white and the battery indicator
shows green.
Always make sure Neato is on its charge base
when finished cleaning.
Choose Your Language
5
Set Language
Dansk
Dutch
English
Suomi
Find your language using
Press SELECT to choose a language.
To change language later, go to Main Menu,
Settings, Language, and then choose
SELECT
your language.
6
buttons.