Osd Setup - Xoro HRS 8590 LAN Bedienungsanleitung

7. TXT Language: Set the TXT language.
8. Auto Channel Selection: If you set ON, in the channel list will play automatically
when you highlight the channel. If you set OFF, in the channel list when you highlight
the channel, you should press the OK button to play it.
9. Auto Exit CH List: If you set ON, the channel list will disappear when you press
OK on a Highlighted channel. If you set OFF, the channel list will disappear when
you press OK on a playing channel.
11. Recall List: You can turn Recall List on or off. If you set ON, when you press
Recall button of RCU you can get the recall list. If you set OFF, when you press
recall button you can go back to the last program you have selected.
13. Front Panel Light: Set the brightness of the LED.
12. Eco-Standby: You can turn Low Power Standby on or off.

5.2 OSD Setup

Menu->SETTINGS->OSD Setup
1. Digital Audio: If a channel has AC3 and PCM audio language at the same time,
when you select RAW it will set AC3 audio language as default output and when you
select PCM it will set PCM audio language as default output.
2. Menu Transparency: Set the
transparency of all menus.
3. TXT Transparency: Set the
transparency of Teletext.
4. Display Mode: Set the HDMI format.
5. TV Type: Set the TV Type on
PAL/NTSC state.
6. Screen Mode: Set the display format
according to the screen ratio.
7. OSD Timeout: Set the display time of the program information.
8. Scart Output While the HDMI Mode is set to 576i or 480i mode, you can change
the Scart output mode between CVBS and RGB mode.
ENG 13