Getting Started; Troubleshooting - Klarstein 10027674 Bedienungsanleitung

Setting the Tenperature Control
• Your Wine Cellar has been equipped with an "automatic" control panel lock, that will inactivate 12
seconds after the last time a button has been touched.
• Push the and
a "BEEP" sound to alert you that the control is now active.
• If you desire to chance the temperature set the temperature as you desire by touching the
button.
• Touch the button once to select the lower zone and once more to select the upper zone The
numbers in the display window will flash.
• The temperature that you desire to set will increase 1°C if you touch the button once on the con-
trary the temperature will decrease 1°C if you touch botton once.
NOTE: When you use the wine cooler for the first time or restart the wine cooler after having been
shut off for a long time, there could be a few degrees variance between the temperature you select
and the one indicated on the LCD readout. This is normal and it is due to the length of the activation
time. Once the wine cooler is running for a few hours everything will be back to normal.
Storage Capacity
You can place 18 standard bottles in this model. Many bottles may differ in size and dimensions. As
such the actual number of bottles you may be able to store may vary. Bottle capacities are approxi-
mate maximums when storing traditional Bordeaux 750ml bottles and include bulk storage.
Interiour Light
You can turn the interior light ON or OFF by pushing the button marked with the "Light" symbol
The light will be turned off automatically if it remains ON for 10 minutes. You have to push the button
marked with the "Light" symbol
Important Hints on Use
• The wine cooler will have better performance at ambient of 20-25 degree; We suggest the wine
cooler be powered off if the ambient temperature is lower than 10 degree.
• After plugging the appliance, allow the unit to cool down for 2-3 hours before placing beverage
into the cooler compartment.
• Ventilation is very important for this kind thermoelectric wine cooler; The inside PCB will be broken
easily if the ventilation is bad; It will also reduce the life of the wine cooler.
• These models use a thermoelectric cooling system with automatic defrosting system, so there is
no need to defrost it manually.Sicherheitshinweise
Failure Possible reason
No cooling No power
PCB broken
Fan broken
Leakage
Cooling module broken
Ice inside No defrost
the minibar
Low ambient temperature

Getting Started

button simultaneously for 3 seconds to unlock the control panel. You will hear
again and the light will turn back on.

Troubleshooting

Action
Check the electricity supply, or change a new plug.
Replace a new PCB.
Replace a new fan.
Replace a new heat pump.
Replace a new cooling module with silicone.
Stop working for at least one hour, then restart it
Adjust the air-conditioner to be around 25 degree.
or
.
8