Technical Data; Safety Instructions; Ventilation Instructions - Klarstein 10027674 Bedienungsanleitung

Dear Customer,
Congratulations on purchasing this Klarstein eqipment. Please read this manual carefully and take
care of the following hints on installation and use to avoid technical damages. Any failure caused by
ignoring the mentioned items and cautions mentioned in the operation and installation instructions
are not covered by our warranty and any liability.
Technical Data 6
Safety Instructions 6
Ventilation Instructions 6
Product Description and Display 7
Temperature Control 7
Getting Started 8
Troubleshooting 8
Electric Diagram 9
Environment Concerns 9
Declaration of Conformity 9
Item number
Capacity
Power supply
Rated power
Dimension (W x D x H)
Weight
• Position your wine cooler so that the plug is accessible.
• Keep your wine cooler out of direct sunlight.
• Do not place next to heat generating appliance.
• Do not place directly on the ground. Provide suitable stand.
• The wine cooler must be connected to a properly earthed socket in line with relevant valid country
regulations before operating.
• Check the data label (which is on the side of the wine cooler) for voltage and frequency corres-
ponds to your local one; If not, don't plug your cable into the socket.
When putting a TE wine cooler, ventilation should be considered seriously, please refer to the fol-
lowing:
• There should be left at least 200 cm³ for ventilation
• The distance between wall and wine cooler side should be at least 20mm
• The bottom should be left at least 50mm for air flowing
• Air passing through must not be preheated
• Entire cooling system should be considered in the ventilation
Contents

Technical Data

Safety Instructions

Ventilation Instructions

10027674
43 liters
220-240 V ~50-60 Hz
65 W
345 mm x 508 mm x 645 mm
17.9 kg
6