AEG DVD 4625 HC HDMI/USB Bedienungsanleitung Seite 72

English
72
05_DVD 4625 HC AEG - GB.indd 72 05_DVD 4625 HC AEG - GB.indd 72
Front Speaker; Center Speaker; Rear Speaker; Subwoofer
NOTE:
The „Center Speaker" and "Rear Speaker" menus can only be selected if
the "5.1 CH" option is activated in the "Downmix" menu.
Here you can set the characteristics of the loudspeakers.
Large: The loudspeaker produces bass and treble sounds.
Small: The bass is fi ltered out and routed to the subwoofer.
Off : The loudspeaker does not produce any audio signals.
Dialog
NOTE:
The „Dialog" menu is only available if the „LT/RT" option or the
„Stereo" option is activated in the „Downmix" menu.
In the „Dialog" menu it is possible to adjust the loudspeakers of the dia-
logs. Increase the volume of the dialogs with the Cursor button „ "or
reduce the volume with the Cursor button „ ".
D.R.C.
With this function you can limit the maximum volume that can be set in
order to prevent damage to your loudspeakers.
On: The maximum volume that can be set is limited.
Off : The limit for the maximum volume that can be set is switched
off .
ATTENTION:
If „DRC" is switched off it is possible to turn up the volume to such
an extent that the loudspeakers may be damaged.
Auto: Automatic restriction of the maximum volume that can be set.
Digital Audio Setup
Digital Output
Here you specify the settings for the digital Audio output.
SPDIF/OFF: Output of an analogue Audio signal, but no digital
signal.
SPDIF/RAW: Output of a digital Audio signal. Use this setting if your
amplifi er is no two-channel stereo amplifi er.
SPDIF/PCM: Output of a digital Audio signal that is converted to a
2-channel signal. Use this setting if your amplifi er is a two-channel
stereo amplifi er.
NOTE:
If there is no Audio output, even though you connected the DVD-
Player to an amplifi er, you will most likely have chosen an incorrect
setting for the Audio output.
24.06.2010 16:48:56 Uhr 24.06.2010 16:48:56 Uhr