AEG DVD 4625 HC HDMI/USB Bedienungsanleitung Seite 57

Fig. 2/19
Fig. 2/15
Fig. 2/20
Fig. 2/14
05_DVD 4625 HC AEG - GB.indd 57 05_DVD 4625 HC AEG - GB.indd 57
HDMI
Connection using a HDMI cable ensures a very high replay quality.
HDMI is used to transmit both Video and Audio data.
1. Plug the HDMI jack into the socket on the back of the player.
2. Plug the HDMI jack into the corresponding socket on your playback
device.
NOTE:
In the „Video Settings" menu select the submenu „HDMI Setup". Then
select the „On" option in the „HDMI" menu.
Component Video
Connection using a Component Video cable ensures a very high replay
quality.
Component Video transmits only Video signals.
1. Plug each of the three jacks into the corresponding sockets on the
DVD-Player.
2. Plug the jacks into the corresponding socket on your playback
device.
Select „Video Output" from the menu „Video Setup Page". Here you
can change the settings „Off ", „YUV and „RGB" on the playback de-
vice that you have connected. Please see the operating instructions
of the connected device for the correct setting.
S-Video
Connection using a S-Video cable ensures a very high replay quality.
Component Video transmits only Video signals.
1. Plug the S-Video jack into the socket on the back of the player.
2. Plug the S-Video jack into the corresponding socket on your play-
back device.
Composite-Video
Composite-Video is used to transmit both Video data.
1. Plug the Composite-Video jack into the socket on the back of the
player.
2. Plug the Composite-Video jack into the corresponding socket on
your playback device.
English
57
24.06.2010 16:48:50 Uhr 24.06.2010 16:48:50 Uhr