Herunterladen Diese Seite drucken

Power Handling Capacity; Using Spikes - Revox Re:sound L 120 Anleitung

Vorschau ausblenden Andere Handbücher für Re:sound L 120:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

120

Power Handling Capacity

The power handling capacity
stated on the type plate of your
Revox loudspeakers refers to
an amplifier with tone control
set to linear. lt is possible to use
these
loudspeakers
amplifiers rated for a higher
power output.
However,
ensure
volume is only increased until
your ear - in most cases reliably
-detects an overload. First signs
of
overload
are
increase in distortions.
Your Revox loudspeakers will
not be damaged by a short-time
overload.
Damage of Ioudspeaker drivers
due to overload can easily be
determined
by
personnel. In such cases, you
are not entitled to any warranty
work.
with
that
the
a
heavy
the
service
12

Using spikes

The Re:sound L120 is fitted with
spikes during manufacture. The
spikes serve to decouple the
speaker from the floor it is
placed on. For this purpose, the
4 spikes are screwed into the
threaded sockets on the base of
the
speaker.
The
millimetres of the thread should
be used for ensuring that the
speaker is level, so that the
weight
of
the
distributed evenly over all four
spikes.
Use the supplied spike cups,
with felt disc under the spikes,
to avoid scratching the floor.
Re:sound L
last
few
speaker
is

Werbung

loading