Feldübertragungsfaktor 23 mV/Pa = –32,5 dB re. The output sensitivity is 23 mV/Pa = –32.5 dB re. Da der Verstärker des TLM 103 bis unter 20 Hz li- transmitted without distortion as well. 1V/Pa. Das Mikrophon wird mit 48 V, 3 mA phan- 1 V/Pa.
5-pin XLR output of the BS 48 i-2 power supply or Das Mikrophon TLM 103 besitzt eine nickelmatte The TLM 103 microphone has a matt satin finish BS 48 i-2 oder der Matrixbox MTX 191 A an Gerä- the MTX 191 A matrix amplifier to units with a Oberfläche und ist mit einem 3-poligen XLR-Steck-...
TLM 103 3.2 Betrieb mit Netzgeräten 3.2 ac Supply Operation Beim TLM 103 ist Pin 2 normgemäß die „heiße In the case of the TLM 103 condenser microphone Phase“. Für unsymmetrische Eingänge muss PIN 3 pin 2 is the “hot phase“, in accordance with the Für die Stromversorgung sind alle P48-Netzgerä-...
TLM 103 Technische Daten Technical Specifications Einige Hinweise zur Pflege von Hints on Microphone Maintenance Mikrophonen Staubschutz verwenden: Mikrophone, die nicht im Use a dust cover: Microphones not in use should Akustische Arbeitsweise ... Druckgradienten- Acoustical op. principle ..... Pressure gradient Einsatz sind, sollte man nicht auf dem Stativ ein- not be left on the stand gathering dust.
EA 1 mt ....sw .... Best.-Nr. 08450 EA 1 mt ....blk ..... Cat. No. 08450 Die EA 1 ist für die Mikrophone TLM 103, TLM 127, The EA 1 is designed for the TLM 103, TLM 127, TLM 193 und M 147 Tube vorgesehen. Der schwenk- TLM 193 and M 147 Tube microphones.
Seite 7
Gewindezapfen und ein mitgeliefertes Redu- an adapter for 1/2" and 3/8" threads. Windschutz für U 67, U 87 (Ai), TLM 50, TLM 103, Windscreen for U 67, U 87 (Ai), TLM 50, TLM 103, zierstück ermöglichen die Verwendung für 1/2"- TLM 127, M 147 Tube und TLM 170 (R).
Seite 8
TLM 103 IC 3 mt IC 31 mt IC 4 (mt) MNV 87 (mt) MF 3 MF 4 AC 22 AC 25 AC 27 MF 5 PS 15 N 248 BS 48 i BS 48 i-2 PS 20 a STV...
Seite 9
Irrtümer und technische Änderungen vorbehalten • Errors excepted, subject to changes Printed in Germany • Publ. 01/06 71761/A05...