Disposal; Maintenance And Cleaning; Replacing The Fuse; Exchanging The Fuse - VOLTCRAFT HPS-11530 Bedienungsanleitung

Disposal

Electronic products are potentially recyclable and do not belong in the household
waste. At the end of its service life, dispose of the product at the community collection
point according to the relevant statutory regulations. It is prohibited to dispose of the
device in the household waste.

Maintenance and Cleaning

Apart from an occasional cleaning or exchanging the fuse, this laboratory power unit is maintenance-
free. Use a clean, lint-free, antistatic and dry cloth to clean the device. Do not use any abrasive or che-
mical agents or detergents containing solvents.

Exchanging the Fuse

If it is no longer possible to switch on the laboratory power unit, the rear mains fuse (19) is probably
defective.
Proceed as follows to replace the mains fuse:
Switch off the power unit and remove all the connection cables
and the mains plug from the device.
Lever the rear fuse holder (19) with a suitable screwdriver
from the bracket.
Replace the defective fuse with a new fine-wire fuse (5 x 20
mm) of the same type and rated current. The fuse value is
listed in the chapter on "Technical Data".
Press the fuse insert into the fuse holder.
42