Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Manual
Article No.: 843001
11. Mounting intruction
1.
Mount an electrical box inside the wall.
2.
To separate the glass panel and the back cover
of the controller use a screwdriver along the gap
of the back cover.
3.
Mount the back cover on the electrical
box with the 2 screws.
4.
Connect the DMX wires to the DMX interface.
Make sure that you do not invert the „+" and
the ground from power cable.
5.
Press the glass panel on the back cover.
9
Werbung
Kapitel
Inhaltsverzeichnis
