Controls - Kapego DMX Touch 16C Bedienungsanleitung

Manual
Article No.: 843001

8. Controls

1. Power ON/OFF
Push the power button for 2s then the panel will turn on. The same when the panel is in power on
status just push the power button for 2s the panel will turn off.
2. Zone
If you push one of the 4 zone buttons the button and its 4 channel buttons will light up. Now you
can control the whole selected zone (channel 1-4)
3. Channel
You have already selected one zone, then you can select on off the 4 channels in that zone. If you
push one of the 4 channel buttons, it will light up alon and you can control just one channel.
4. Touchwheel
If there is no zone or channel selected you can control the brightness of all 4 zones and their
channels.
When you have choosen one zone you can control the brightness of all 4 channels in that zone.
And when you have choosen one channel in one zone, you can control this channel seperatly.
Everytime you turn the panel off it will save the last brightness of each zone and channel till you will
turn it on again.
6