RUSTA 900701260101 Gebrauchsanweisung Seite 4

ENG
ASSEMBLY
Before initial use
1. Before using the appliance for the first time, unpack it and place all the parts on a level
surface.
2. The jar assembly (including the measuring cup, lid, seal ring 1, jar unit, seal ring 2 and
blade assembly) has already been assembled onto the motor unit. Disassemble to
wash all detachable parts except the motor unit. Refer to CARE AND CLEANING below.
3. Once all the pieces have been cleaned and dried thoroughly, reassemble.
4. Invert the jar unit onto a level surface. While holding the jar handle, put the seal ring 2
and blade assembly onto the jar base bottom and secure the blade assembly by tur-
ning it anti-clockwise until tight (see Fig. 1).
5. Reposition the jar assembly with its opening upwards. Wrap the seal ring 1 around the
lid bottom and put the lid onto the jar assembly. Place the measuring cup correctly
into the lid by inserting the small projection on both sides of the cup into the lid slots
and turning the cup clockwise until tight (see Fig. 2).
6. Finally, place the assembled jar onto the motor unit by aligning the strip on the as-
sembled jar bottom (see Fig. 3).
CAUTION: The jar and jar base are now secure. Do not try to twist the jar and jar base
onto the motor unt.
Fig 1
4
Fig 2
Fig 3