The first three steps show correct function of the display.
The minute - setting is now completed. When the Master clock or another clock used during a
competition shows 49 minutes 00 seconds activating
the same moment you push the button
Push again the button A.
When pushing button
colon which
a) shows you the digit, that can be set;
b) confirms the use of the Count -Down - Function.
Activating the button
between the two digits representing minutes-display.
The button
C
sets the ten-minutes-digit on 5 when
pushing the first time. Every repetition of pushing
will reduce the digit by one. The button
digit by one but not more than 5. The button
changes from ten- minutes-digit to minute-digit.
The button
C
reduces the digit by one, the button
raises the digit by
one.
minute - setting. The third dot disappears.
D
synchronizes the Time Voice Box. In
D
you will see the four decimal points as confirmation.
6
B
a third dot appears below the
B
the decimal dot changes
D
The button
A
concludes the
C
raises the
B
D