Hints & Tips - Sage the Boss To Go Chill Cup Bedienungsanleitung

Assembly
Before first use
• Before using your Boss To Go Chill Cup
for the first time, remove any packaging
material and promotional labels.
• Be careful when handling the blades
as they are extremely sharp.
• Wash the cup, lid, blade assembly and
attachments in warm soapy water with
a soft cloth. Rinse and dry thoroughly.
Assembly
1. Remove blades and position the cup
with opening facing up.
2. Add ingredients avoiding filling past
the MAX line.
3. Fix the blade assembly in place with
a quarter turn in the clockwise direction.
Ensure the blade assembly collar is securely
in place before inverting the cup to blend.
2
Hints & Tips
• Never blend hot (or even warm) ingredients.
The blades form a seal with the cup, and
there is no venting for steam to be released.
• We recommend not blending longer than
1 minute at a time. Ingredients in the cup
may become warm and cause internal
pressure on the seals making it difficult to
open or splatter ingredients when opened.
Allow to cool and take care when opening.
• Always add liquids for optimum blending
If the blending action is not causing
the ingredients to circulate, try adding
more liquid.
• If the results are lumpy, try reducing the
ingredients, or blending in batches.
• Run the blender only for the appropriate
amount of time required – do not over blend
ingredients.
• If foods are thick, use a pulsing action by
twisting the cup to engage and disengage
the motor as needed. This will help
ingredients circulate.
• Do not exceed the maximum mark when
adding foods and liquids into the cup.
• To stop blending at any time, rotate the cup
anti-clockwise to disengage the motor.
• The maximum amount of ice cubes the
blender can process is 3 from a standard ice
tray. This also applies to frozen fruit. Cut fruit
into pieces of a similar size to an ice cube
before freezing.