Clatronic ProfiCook DKI 3184 Bedienungsanleitung, Garantie Seite 55

ProfiC_BDA_DKP_3184_ka2.qxd
Connection
• Before inserting the mains plug into the socket check whether the voltage which you
intend to use corresponds to that of the machine. Please see the label on the machine
for details.
• Only connect the machine to a correctly installed safety socket, 230 V/50 Hz.
Initial operation
1. Standby mode: After you have connected the device's plug to the mains supply, the hub
is in standby mode. The lights of the ON/OFF buttons switch on.
2. Put a suitable pot on the cooking zone.
3. Push the ON/OFF button (2) to start the cooking process.
The lights of the HEAT function flash.
Cooking function
Press the HEAT button once or the TEMP. button twice in order to choose a cooking func-
tion. The lamp for the corresponding function lights up.
HEAT power control system for cooking
• The food to be cooked is continuously simmering on the power setting which has been
selected by you.
i
NOTE:
- The display shows the power level 5.
- After the cooking zone has been switched on the selected power setting can be
changed at any time with the keys (+/-).
TEMP. Temperature controlled cooking
• The food to be cooked will be heated up to the temperature selected by you and kept
warm on this temperature by automatic regulation.
i
NOTE:
- The display shows the value "120".
- After the cooking zone has been switched on the pre-selected temperature can
be changed at any time with the keys (+/-).
- In case of temperatures up to 200 °C this function is suitable also for frying. Please
do use only highly heat-resistant fat!
04.09.2007 14:33 Uhr
Operating instructions
Seite 55
GB
55