Appliance Description - Beem DYNAMIC i-POWER Bedienungsanleitung

DYNAMIC i-POWER
Before using for the first time
Clean the appliance and the accesso-
‹
ries as described in the Cleaning and
care section.
Make yourself familiar with the steam
‹
ironing function of the appliance (Fill-
ing with water and Steam ironing
sections). Switch on the steam func-
tion and iron an old cloth for several
minutes, adding a steam shot from
time to time (Steam shot section).
NOTE
► Residual assembly grease may be
on the appliance. It is therefore pos-
sible that light odour or smoke could
occur when using for the first time.
► A new appliance can spray con-
densed water drops, this stops after
the appliance is used several times.
Perform self-cleaning as described in
‹
the Self-cleaning section.
22

Appliance description

(See illustration on the left fold-out page)
1 Spray nozzle
2 Tank cover
3 Steam flow regulator
4 Steam shot button
5 Spray button
6 Handle
7 Mains cable
8 Bend protection
9 Temperature display
10 Pedestal
11 Control indicator
12 Water tank
13 Temperature regulator
14 "MAX" mark
15 Self-clean button
16 Ironing sole
17 Measuring cup
18 User manual (not illustrated)
Steam flow regulator
Level Function
0 no steam
continuous adjustment of
the steam flow from 0 to the
maximum steam flow (com-
pletely right)
BEEM - Elements of Lifestyle
EN