Playing Lullabies - AUDIOLINE Baby Care 2 Bedienungsanleitung

4.7

Playing lullabies

Five lullabies, each with a length of 30 seconds, have been stored to help your baby fall asleep peacefully. With several repeats,
the playing time amounts to approximately 5 minutes. Lullabies can be played both via the baby unit and via the parent unit.
Playing lullabies from the baby unit
You can find the required LULLABY 1 to 5 or select PLAY ALL by repeatedly pressing the
setting, all lullabies will be played one after the other for 5 minutes.
You can start and stop the playback by pressing the
then continue with the same button
Playing lullabies from the parent unit
1. Press the MENU button (19).
2. Select LULLABY from the menu with the
3. Confirm with the
4. Press the button (17) once more and the lullaby that was last played will be played again. If you want to select a
different lullaby, first press the
5. Confirm with the
6. Now select the required lullaby using the
7. Confirm with the
one after the other for 5 minutes.
8. The button (17) can be used as a PAUSE button during playback.
9. To stop playback, press the MENU button (19). The display will show LULLABY OFF?.
10. Confirm with the
(7).
button (20).
button (17). The display will show PLAY?.
button (20). The message CHOOSE LULLABY will appear in the display.
button (17).
and
button (17) and the selected lullaby will be played. In the PLAY ALL setting, all lullabies will be played
button (17) and playback will be stopped.
- Operation -
button (6). You can pause playback by pressing the
buttons (20). Or select PLAY ALL.
button (10). In the PLAY ALL
button (7) and
31