Setting Up; Check Contents Of Pack; Parent Unit; Fitting Standard Batteries - AUDIOLINE Baby Care 2 Bedienungsanleitung

3

Setting up

3.1

Check contents of pack

The following items are supplied
one parent unit including belt clip
one baby unit
2 rechargeable standard batteries for parent unit
3.2

Parent unit

3.2.1

Fitting standard batteries

Open the battery compartment on the parent unit by pushing up the battery compartment cover by its bottom end. If the belt clip
has been fitted, this must be removed first. Now insert the standard rechargeable batteries taking care to ensure that the polarity is
correct. Close the battery compartment cover.
NOTE:
Do not use normal, non-rechargeable batteries in the parent unit.
Never use the parent unit on the charging station without standard rechargeable batteries.
3.2.2

Fitting or removing the belt clip

To fit the belt clip, place the top end into the parent unit and then
press the belt clip downwards. To remove the belt clip, use a
screwdriver to press on the retainer inside the clip and pull the
belt clip upwards.
3.2.3

Connecting the charging station

The plug-in mains power supply is permanently connected to the charging station. Plug the power supply into a properly installed
230 V mains socket.
26
- Setting up -
charging station for parent unit including power supply
Plug-in power supply for baby unit
one instruction manual
Fitting the clip Removing the clip