Setting The Volume; Selecting The Language - Hartig+Helling MBF 9091 Bedienungsanleitung

Setting the volume

Volume .
Up [6] or Right [8]
Down [9] or Left [5]
Setting the brightness
Brightness
Up [6] or Right [8]
Down [9] or Left [5]
Selecting the picture section
Zoom In .
Up [6] or Down [9]

Selecting the language

Language .
Up [6] or Down [9]
Registering/Deregistering transmitter units
Register Camera .
An icon indicates whether a transmitter unit is registered at positions Camera 1 to Camera 4 .
Thumbs up Transmitter unit is registered.
Registering a transmitter unit
Deregistration is only possible from an occupied position, e.g. Camera 2 .
Register Camera
Press ON/OFF [15] on the transmitter unit.
Deregistering a transmitter unit
Example Camera 2 .
Register Camera
Selecting a transmitter unit
If several transmitter units are registered, a transmitter unit can be selected manually or the screen can switch
units automatically at preset intervals.
Selecting a transmitter unit manually
Example Camera 2 .
Camera Selection
Changing transmitter units automatically
Example: every 20 seconds.
Camera Selection
Deactivating changing transmitter units automatically
Camera Selection
20
Raise the volume.
Lower the volume.
Increase the brightness.
Reduce the brightness.
Select the picture section.
Select the language.
Camera 2 Yes
Camera 2 Yes
Manual Selection
Auto Scan 20 seconds .
Auto Scan Never .
Register Camera 2? .
Camera 2 unregistered .
Camera 2 .
G