Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Display and explanation of operations
Æ
[2]
RESET
5 sec.
Volume
Inserting the battery in the receiver unit
Slide the cover on the rear downwards and remove it.
Insert the battery in the battery compartment.
Close the battery compartment.
The battery must be charged for at least 8 hours before being used for the first time.
Inserting the micro SD card in the receiver unit
In order to record videos or take pictures, a micro SD card [14] must be inserted (not included).
Slide the holder downwards, carefully.
Open out the holder.
Insert the micro SD card [14].
Close the holder.
Slide the holder upwards, carefully.
Using the base for the transmitter unit
The base enables the camera [17] to be aligned accurately. The base can also be used to install the transmitter
unit on a wall or the ceiling.
Screw the screw in the base in the thread [16] on the rear side of the transmitter unit.
Align the camera [17].
Fix the alignment using the screw at the rear of the base.
Action to take
Result of action
Reference number in the graphic
Press the button
Press and hold the button
Keep the button pressed for 5 seconds
Select the subsequent menu option with the Navigation buttons, Left
Up [6], Right [8] or Down [9], and confirm the selection by pressing the
Menu button [7].
Represents the appearance of a menu option.
Represents the appearance of an icon.
The holder is locked.
The holder is unlocked.
G
[5],
17
Werbung
Inhaltsverzeichnis
