Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Electronic Door Lock
secuENTRY pro 7072 REMOTE
Instructions for use
Power supply: Stabilised mains adapter (5V – 12V)
With the secuENTRY pro 7072 REMOTE you have the chance to
switch a secuENTRY cylinder and the secuENTRY pro 7071 RELAY.
The secuENTRY pro 7072 REMOTE is being initiated by a
potential-free switch contact with an impulse duration of 0,5-1
second. The potential-free contact has to be connected between the
blue connecting wire and the positive pole (red connector) to the
voltage source.
Please connect the wires according to the diagram.
blue
red
+
-
black
Important: With damage due to wrong installation, the warranty
claim expires. The BURG-WÄCHTER KG reserves the right to make
changes regarding the product, technical data or the user manual
without prior notice.
Please read the instruction manual carefully before commissioning.
The installation should only be performed with the necessary
knowledge. The secuENTRY pro 7072 REMOTE is not constructed
for exterior assembly, it should not be exposed to direct weather.
For secure appliance we advise you to conduct the assembly in a
weather protected area.
QR code
Enclosed to every secuENTRY pro 7072 REMOTE is a QR code.
This QR code is required for setting up the switching possibilities via
the secuENTRY software.
Attention! With a loss of the QR code, the secuENTRY pro 7072
REMOTE cannot be introduced to the software and is therefore
unusable. Please store the code away safely!
·
·
Altenhofer Weg 15
BURG-WÄCHTER KG
Download: www.burg.biz
Download: www.burg.biz
Download: www.burg.biz
Download: www.burg.biz
Descarga: www.burg.biz
Download: www.burg.biz
Tip: The QR-code can also be scanned in electronic form as a ile
or saved as a photo onto a protected data carrier.
Commissioning
The secuENTRY pro 7072 REMOTE functions as an evaluation unit
that is integrated into your locking environment via the PC software.
This instruction manual demonstrates only the procedure for incor-
porating the secuENTRY pro 7072 REMOTE, learn more details from
the instructions for the PC software.
Instructing the secuENTRY pro 7072 REMOTE
For instruction to the software, the QR code needs to be scanned.
• Connect a webcam
• Right-click in the user administrator menu on the ield "Serial
Number"
• Select "Scan QR-Ident" and afterwards "Scan Key/Switch"
Ill.1: Scanning of the transponder
• Hold the QR code in front of the camera so that it can be read
properly. Please note that the QR code of the Key/Remote includes
the following information: (UID, BW and Type)
Ill.2: Scanning QR code
• Click Capture so that the data can be saved
·
·
58300 Wetter
Germany
www.burg.biz
Download: www.burg.biz
Descărcare: www.burg.biz
Download: www.burg.biz
Pobieranie pliku: www.burg.biz
Download: www.burg.biz
Stáhnout: www.burg.biz
Ladattava tiedosto: www.burg.biz
Letölthető: www.burg.biz
λήψη: www.burg.biz
Download: www.burg.biz
İndir: www.burg.biz
Download: www.burg.biz
Ill.3: User administration
• Click Save - the data is transferred
Programming mode
The secuENTRY pro 7072 Remote can be assigned via the PC software as
1:1 or 1:n to the programmed locks. For this setting, the Remote must be
in programming mode. This requires the contact between the blue lead
wire and the red positive pole for 10 sec. to be closed and the remote
switches for 40 sec. to the programming mode. Further details on the
allocation options can be found in the manual of the PC software.
Warranty
To provide you with a qualitative impeccable and valuable product and to
optimally help you in the case of service or repair, it is necessary that lawed
or defective devices are handed back to your retailer together with the QR
code and the original proof of purchase.
Disposal of your device
Dear customer,
please help to avoid waste. If you consider to dispose of this device, please
note that many components of it consist of valuable materials that can be
recycled.
Download: www.burg.biz
загрузка: www.burg.biz
Download (зареди): www.burg.biz
Download: www.burg.biz
BW_Remote_BA_sE_013120
We point to the fact that electric and electronical devices as
well as batteries are not to be disposed via household rubbish
but need to be collected separately. Please inform yourself at
your local competent authority about respective collecting
points for batteries and electric waste.
For questions about the EG declaration of conformity please
contact info@burg.biz.
Printing and typographical errors as well as technical alterations reserved.
Englisch I 2
Werbung
