Operation - Teesa TSA1010 Bedienungsanleitung

8
• Switch the kettle off before removing it from the base.
• Always ensure that the lid is tightly closed.
• The base and exterior of the kettle must not become wet.
• Kettle body used must match with the kettle base.
Before using the kettle for the first time, fill the kettle with cold water and boil it. After the kettle switches
off automatically, pour the water out, and repeat the process.
1. Fill the kettle with water. Do not overfill. Use the water level indicator.
2. Place the kettle on the base.
3. Connect the kettle to 220-240 V, 50/60 Hz socket.
4. Switch the kettle to position '1' . The control lamp on the water indicator shows that the
water is being boiled.
5. After boiling, the kettle switches off automatically.
Do not open the lid when pouring.
If the kettle is overfilled, boiling water may be ejected.
The kettle is only to be used with the stand provided.
6. This appliance is intended to be used in household and similar applications such as:
• staff kitchen areas in shops, offices and other working environments;
• farm houses;
• by clients in hotels, motels and other residential type environments.
This kettle is equipped in thermal control function, which allows to set desired heating temperature
(60°, 70°, 80°, 90°), or temperature sustaining option (for 2 hours).
1. Place the base on a dry, smooth and stable counter, and insert the plug into the socket.
2. Press the
3. After the water is boiled, indicator turns off and the buzzer again sends out a sound.
EN
Press and hold
water.
Whenever the water temperature drops to 85° C, the kettle will reheat the liquid inside the kettle. The
process will be repeated automatically for 2 hours. After that, temperature sustaining function will be
switched off. Throughout the entire 2 hours process, LED indicator will be red.
Press once, LED light next to 60° C will shine, while color indicator will become green. The kettle will
heat water inside up to 60° C, and automatically switch off.
Press twice, LED light next to 70° C will shine, while color indicator will become blue. The kettle will
heat water inside up to 70° C, and automatically switch off.
FIRST USE OF THE KETTLE
THERMAL CONTROL (ONLY FOR TSA1515 MODEL)
key shortly; short sound signal means the kettle has started to operate.
Temperature sustaining function (2 hours)
button for 3 seconds. The buzzer sends out sound signal, and the kettle will boil the
Desired heating settings 60°, 70°, 80°, 90°

Operation

Owner's manual