Playing Back Music Via Bluetooth; Playing Music Via Usb - AEG MC 4462 BT Bedienungsanleitung

NOTE:
• If a disc is inserted the wrong way around, respectively
if no disc is inserted, then the message "Cd rEAd" will
blink and "NO dISC" appears on the display.
• Playback of CDs produced by the user cannot be
guaranteed due to the large variety of software and CD
media available.

Playing back music via Bluetooth

Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientific and Medical). Interference
can be caused for example by WLAN-networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-
enabled device. The functional radius is limited to approx.
15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred be-
tween the playing device (source) and the receiving device.
To be able to remotely control the source, the playback de-
vice must support the AVRCP profile (Audio Video Remote
Control Profile).
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in your
player (e.g. mobile phone). For this, refer to the operation
manual of your player.
2. Use the FUNCTION button (18) to select BT mode. The
indicator light PAIR will flash blue. This signalizes that the
device is in pairing mode.
3. Choose the Bluetooth menu in your player and register
the device in your player. For this, refer to the operation
manual of your player. The device "AEG MC 4462 BT"
will show in your player as a selection.
NOTE:
• Only one playback device can be connected with
the device at one time. If the device is already con-
nected with another playback device, the device
will not appear in the BT selection menu.
NOTE:
• In order to disconnect an existing Bluetooth
connection, press the PAIR button (17). The PAIR
control lamp (5) flashes blue.
4. Now enter the password "0000" in your player, depend-
ing on the device manufacturers, model, and software
version.
If pairing was done successfully, the PAIR control lamp lights
up blue. For the further procedure, please refer to the user
manual of the playback unit. If possible, adjust the volume of
the external unit to a comfortable level.
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
devices.
• In case of problems with the registration of a replay
device, deactivate the WiFi-/ and mobile data function
in your playback device.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player. Observe the operation
manual of your player.
• If a mobile phone on which you are playing music
receives a call, the music will be interrupted. However,
the sound is not played back by the device. After you
have ended the call, the devices are connected to each
other again and playback continues.

Playing music via USB (14)

This device has been developed in line with the latest techni-
cal advances in the USB field. The wide range of different
USB storage devices of all types which are currently on the
market, unfortunately do not allow us to guarantee full com-
patibility with all USB storage devices. For this reason, in rare
cases there may be problems in playing back files from USB
storage devices. This is not a malfunction of the device.
1. Press the FUNCTION button (18) repeatedly until "USB"
is shown on the display.
2. Connect a USB storage device directly into the port.
Playback will automatically start after a few seconds.
For operation, please refer to the section "Description of the
control buttons".
English
43