Herunterladen Inhalt Inhalt Diese Seite drucken

Parts And Operating Controls; Operation - Bosch PHC 9690 Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für PHC 9690:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Congratulations on purchasing this
Bosch appliance. You have acquired a
high-quality product that will bring you a
lot of enjoyment.
Parts and operating
controls
1 on/off switch
2 Temperature selector 
(min 120°C - max 200°C)
3 Display
4 Handle
5 Heating element
6 Threading aid
7 Cable strap
8 Storage bag (heat-resistant)

Operation

  ■ Plug in the appliance and place on the 
heat-resistant storage bag.
  ■ To turn the appliance on, press and hold 
the power switch 1 for approximately two 
seconds. The preset temperature "140" 
(degrees Celsius) blinks on the display 3.
  ■ The desired temperature can now be set 
using the temperature selector 2 at inter-
vals of 10 between 120°C and 200°C:
  – up to 140°C for fine, straight hair
  – approx. 180°C for normal, wavy hair
  – from 180°C for strong, curly hair.
Tip: Reduce the temperature for damaged 
hair (the ideal temperature is approx. 
140°C) to protect it.
  ■ The appliance heats up. Once the 
selected temperature has been reached, 
the display shows "OK" and the tempera-
ture stops blinking.
Note: To turn the appliance off, press and 
hold the power switch 1 on/off for approxi-
mately two seconds.
Ö
Ü
/ 
Use
W Risk of burns!
Never allow appliance to come into contact 
with skin (scalp or ears).
  ■ Only use the appliance on dry hair.
Note: Extensive use can damage the hair.
Styling your hair
This wave iron was designed for creating 
waves in medium to long hair.
Proceed as follows:
  ■ Comb the hair and divide it into even, flat 
strands about 2 to 3 cm wide.
  ■ Make sure that adjacent strands are 
slightly offset.
  ■ Attach the upper strands to the top of 
the head with hair clips; start the styling 
process with the lower strands (Fig. 1).
  ■ Insert a strand of hair at the lower third 
into the gap in the heating element. Use 
the longer arm of the heating element as 
a threading aid (Fig. 2).
  ■ Hold the appliance in a level position and 
lock the tip of the strand into position by 
turning it once or twice; hold the hair ends 
with your fingers (Figures 3 and 4).
  ■ Roll up the strand along the heating 
element by rotating it (Fig. 4).
  ■ Heat the rolled-up strand for approxi-
mately six seconds (Fig. 5).
  ■ Unroll the curl by half a rotation and pull 
the appliance out sideways. Hold the curl 
in place or fix it in place with a hair clip 
(Figures 6, 7 and 8).
  ■ Let the curl cool down to stabilize its 
shape.
  ■ Treat all strands; when you are done, 
style the hair with a large-toothed comb 
or with your fingers.
Important: If you have long hair, use the 
entire surface of the heating elements. This 
spreads the heat evenly through the hair 
and delivers better styling results.
en
9

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis