Santec SNC-3305 Kurzanleitung Seite 2

Kurzanleitung / Quick installation guide
SNC-3302, SNC-3305
To operate the IP camera, please follow these steps:
1. Install the camera in the desired location.
2. Connect the camera to power using PoE (PoE switch or PoE injector required) or
12 V DC.
7
6
3
9
3. Insert the CD (included in the delivery) into your PC/laptop and install the IP-finder.
4. The IP-finder displays an IP address for the camera. Double-click on the IP address
and the Internet Explorer comes up automatically. In case this doesn't work, you may
also enter the IP address (as shown by the IP-finder) manually into the Internet
Explorer. Using the IP-finder, another IP address can be assigned to the camera, if
required.
Note:
The camera comes with a default IP address:
Default IP address:
User name:
Password:
Please refer to the user manual for further information on camera configurations.
Subject to technical changes. Errors excepted.
QUICK INSTALLATION GUIDE
IP camera SNC-3302 and SNC-3305
5
4
2
8
192.168.1.168 (or by DHCP, if available)
admin
9999
No. Connector
1 Line out & Line in/ Mic in
2 Power LED
3 Reset button
4 Auto iris connector
Network (PoE) and
5
network LEDs
Alarm I/O
Pin 1
1
Pin 2
6
Pin 3
Pin 4
7 Video (BNC connector)
8 Micro SD card slot
9 Power supply 12 V DC
Version 1.2sfi/0413/dt-engl/A5
Output +
Output -
Input +
Input -