Herunterladen Inhalt Inhalt Diese Seite drucken

Connecting Devices - HEIDENHAIN IK 5000 QUADRA-CHEK Installationsanleitung

Vorschau ausblenden Andere Handbücher für IK 5000 QUADRA-CHEK:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Installing IK 5000 card
NOTICE
A full-size PCIe slot is required for installing the IK 5000
PCIe card.
Plug the IK 5000 card into a full-size PCIe slot
Install the cardkeeper
Secure the IK 5000 card and cardkeeper with a bracket
screw
Tighten the screw to 0.6 Nm
Secure the card and cardkeeper with a bracket screw
Installing flyouts
Install the flyouts into the appropriate locations
Secure each flyout with a bracket screw
Installing flyout connecting cables
Each IK 5000 configuration combines flyouts that utilize
different sized connectors for each flyout. You cannot
connect a flyout to an incorrect IK 5000 card flyout
connector.
Plug one end of the ribbon cable into the flyout
Plug the other end of the ribbon cable into the IK 5000
flyout connector
See the front fold-out page and the appendix for IK 5000
card, flyout, and connector configuration diagrams.
Connecting PC power supply
Plug the SATA power cable from the PC power supply
into the SATA connector at the top of the IK 5000 card
Closing PC enclosure
Confirm that all cards, cable connections, and flyouts
are securely fastened
Replace the PC covers or panels
22
4.4
Connection possibilities
Devices are connected to the channel inputs provided on
the IK 5000 card and the flyout cards. The number and
type of connectors available for the devices may vary from
system to system.
Further Information:
graphics.
Connecting device cables
Md = 0.6 Nm
Symbol

Connecting devices

"F", page 165 and following
NOTICE
Electrostatic Discharge (ESD)!
This product contains components that can be
destroyed by electrostatic discharge (ESD).
It is essential to observe the safety precautions for
handling ESD-sensitive components
Never touch connector pins without ensuring proper
grounding
Meaning
Electrostatic Sensitive Devices (ESD)
Wear a grounded ESD wristband when
handling product connections
NOTICE
Do not overtighten connector mounting screws.
Do not use vacant pins or wires.
Connect the cables of the devices to the respective
connectors on the rear panel
HEIDENHAIN | IK 5000 QUADRA-CHEK | 7/2016

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis