Inhaltsverzeichnis
Werbung
3.4.5
DRAM CLK Skew on Channel A1/A2/B1/B2 [Auto]
Die Einstellung dieser Elemente kann die DRAM-Übertaktung verbessern.
Konfigurationsoptionen: [Auto] [Advance 350ps] [Advance 300ps] [Advance 250ps]
[Advance 200ps] [Advance 150ps] [Advance 100ps] [Advance 50ps] [Normal]
[Delay 50ps] [Delay 100ps] [Delay 150ps] [Delay 200ps] [Delay 250ps] [Delay
300ps] [Delay 350ps]
3.4.6
DRAM Timing Control [Auto]
Konfigurationsoptionen: [Auto] [Manual]
•
•
1st Information: 4-4-4-15-3-36-5-3
Die Werte hängen von der Einstellung der folgenden Unterelemente ab:
CAS# Latency [ 5 DRAM Clocks]
Konfigurationsoptionen:[3 DRAM Clocks] [4 DRAM Clocks] [5 DRAM Clocks]
[6 DRAM Clocks] [7 DRAM Clocks] [8 DRAM Clocks] [9 DRAM Clocks]
[10 DRAM Clocks] [11 DRAM Clocks]
DRAM RAS# to CAS# Delay [ 5 DRAM Clocks]
Konfigurationsoptionen: [3 DRAM Clocks] [4 DRAM Clocks] – [17 DRAM
Clocks] [18 DRAM Clocks]
DRAM RAS# Precharge Time [ 5 DRAM Clocks]
Konfigurationsoptionen: [3 DRAM Clocks] [4 DRAM Clocks] – [17 DRAM
Clocks] [18 DRAM Clocks]
DRAM RAS# Activate to Precharge Time [15 DRAM Clocks]
Konfigurationsoptionen: [3 DRAM Clocks] [4 DRAM Clocks] – [33 DRAM
Clocks] [34 DRAM Clocks]
RAS# to RAS# Delay [Auto]
Konfigurationsoptionen: [Auto] [1 DRAM Clocks] – [15 DRAM Clocks]
Row Refresh Cycle Time [Auto]
Konfigurationsoptionen: [Auto] [20 DRAM Clocks] [25 DRAM Clocks]
[30 DRAM Clocks] [35 DRAM Clocks] [42 DRAM Clocks]
Write Recovery Time [Auto]
Konfigurationsoptionen: [Auto] [1 DRAM Clocks] – [15 DRAM Clocks]
Read to Precharge Time [Auto]
Konfigurationsoptionen: [Auto] [1 DRAM Clocks] – [15 DRAM Clocks]
3-18
Die folgenden Unterelemente werden nur angezeigt, wenn DRAM Timing
Control auf [Manual] eingestellt ist.
Die Konfigurationsoptionen einiger Elemente sind von den im System
installierten DIMMs abhängig.
[3 DRAM Clocks] [4 DRAM Clocks] [5 DRAM Clocks]
Kapitel 3: BIOS-Setup
Werbung
Inhaltsverzeichnis
