Carson Nano Racer Anleitung Seite 2

inserting the Batteries
Attention
• Never mix used and new batteries.
• Never use batteries of different types together.
Nano Racer
100% RTR (Ready-To-Run) model
1 2
1. Open the battery compartment on the back of the transmitter.
2. Insert the batteries in the battery compartment with correct polarity.
500404110-13 // Stand: Juni 2016
Charge Battery paCk
Attention Charging via transmitter
For charging the battery of the model, please use only the charger
which is in delivery. Please pay attention for the notes in the manual.
Charging head
Turn the model and the transmitter off.
Charging Jack
Charging via transmitter:
Open the Cover of the charging-port and put out the charging wire,
then put it into the interface of the model. The LED on the controller
Mode switch will turn on. The charging time is about 40 minutes.
When the charging is completed, the LED will turn off.
Controlling the Model
1 2 3 4
Screw the transmitter antenna Extend it to increase its range. Switch the model to "ON" using The function indicator will light
into the transmitter. the ON/OFF switch. up once a function has been
performed on the transmitter.
Right
Forward turn
Setting for directional
Reverse
stability (steering trim)
Left
turn
Function Indicator Charging indicator
The functions Forwards/Backwards and Left/Right allow you to steer
the model in the desired direction. The headlights will always light up
when driving forwards, the rear lights when reversing.
01805-73 33 00
(14 ct/min aus dem
deutschen Festnetz)
Service-Hotline for
Germany: Mo - Do
8.00 - 17.00 Uhr
Fr 8.00 - 14.30 Uhr
CARSON-Model Sport
Abt. Service
Mittlere Motsch 9
96515 Sonneberg