Scope Of Delivery - VOLTCRAFT 51 16 36 Bedienungsanleitung

• Never touch the device or the plug with wet or moist hands. There is risk of a fatal
electric shock!
• Live components may be exposed if covers are opened or parts are removed
unless this can be done by hand.
• Before opening it, disconnect the device from all voltage sources.
• Do not switch the measuring instrument on immediately after having taken it from
a cold to a warm environment. Under adverse conditions, the resulting condensa-
tion could destroy the device. Allow the device to reach room temperature before
switching it on.
• The device generates heat when operating; ensure that it is adequately ventilated.
Do not cover the ventilation apertures of the device!
• Only use fuses of the type and rated current specified. The use of repaired fuses is
not permitted.
• Make sure that the earth wire is not broken as, in the case of error, there could be
danger to life. Further, ensure that the insulation is neither damaged nor destroyed.
• The outputs of the series transformer are not electrically isolated from the mains
supply (auto transformer). Fatal risk can arise if the output voltage is contacted.
• Do not connect direct current (DC). The series transformer functions only with
alternating current (AC).
• If you have reason to assume that safe operation is no longer possible, immediate-
ly take the device out of operation and secure it against inadvertent operation. It
can be assumed that risk-free operation is no longer possible if
- the device shows visible signs of damage
- the device no longer functions and
- has been stored for long periods under unfavourable conditions or
- has been subjected to considerable stress in transit.
• Observe also the safety instructions in the individual sections of these operating
instructions or in the operating instructions of the connected devices.

Scope of delivery

Series transformer
Operating instructions
15