Operating Elements (See Fold-Out Page); Starting Operation; Connection - VOLTCRAFT 51 16 36 Bedienungsanleitung

Operating elements
(see fold-out page)
1 Output earthing socket (115V / 125V / 230V / 240V)
2 Fuse for output voltage, earthing socket (1)
3 Red signal display "polarity of mains plug incorrect"
4 Green signal display "polarity of mains plug OK"
5 115-V output US earthing socket
6 Voltage selection switch, output earthing socket (1)
7 Carrying grips
8 Voltage selection switch, input refrigerating device connection (9)
9 Refrigerating machine connection for mains cable
10 Fuse for input voltage
11 Fuse for output voltage, US earthing socket 115V (5)
Starting up operation
Before starting up operation, both the intended purpose of use
and the safety instructions and technical data are to be observed!
Mains connection:
• Make sure before connection that the change-over switch (8) is set correctly for
the input voltage. To switch it over, use a suitable screwdriver,
230V~ in Germany and most other European countries or
115V~ / 125V~ /240V~ in some of the other countries (non-European).
• Connect the optional earthing power cable to the mains connector jack (9) on the
device. Make sure it is plugged properly.
• Connect the mains cable to an earthed mains socket with protective earthing. The
series transformer is now in operation.
Observe the signal displays on the front.
• If the mains plug is plugged in correctly, the green display "L" (4) will light up.
16