Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
USE
1. The power cable of the patio heater must always be fed upwards and must not lie
close to the patio heater.
2. The power cable must be connected to an earthed socket at 220–240 VAC 50 Hz.
3. The patio heater has two switches. Press one switch to start one of the product's
heating elements (1000W). For full power, press both switches (2000W).
MAINTENANCE AND CLEANING
• Remove the power plug from the socket and allow the patio heater to cool down before
cleaning.
• Wipe the surface using a soft, slightly damp cloth. Never use strong cleaning agents.
• Do not immerse the patio heater in water when cleaning.
• Over time the reflector becomes dusty and must be taken to an authorised service
workshop for cleaning.
STORAGE
If the patio heater will not be used for a long period of time, it should be stored in a cool, dry
and dust-free place. We recommend that you store the patio heater in its original packaging.
TECHNICAL DATA
Voltage
Output modes
Enclosure class
Number of heating elements
Heating element type
Length of power cable
Dimensions
Weight
RIGHT OF COMPLAINT
By law the product must be returned to the place of purchase along with the original
receipt in the event of a complaint. The user is liable for any damage to the product that
is caused by not using the product for its intended purpose or by not following this user
manual correctly. The right of complaint will not apply in these instances.
INFORMATION ABOUT HAZARDOUS WASTE
Used products should be handled separately
from household waste. They should be taken
for recycling in accordance with local rules for
waste management.
AC220-240V, 50/60Hz
1000 W/2000 W
IP65
2
Carbon
1,5 m
L595 x B162 x H105 mm
1,91 kg
7
Werbung
Inhaltsverzeichnis
