Getting Started; Operation - Hama Dual Alarm Bedienungsanleitung

• Do not attempt to service or repair the product
yourself. Leave any and all service work to
qualified experts.
• Do not modify the product in any way. Doing so
voids the warranty.
• Keep the packaging material out of the reach of
children due to the risk of suffocation.
• Dispose of packaging material immediately
according to locally applicable regulations.
Warning - Batteries
• Immediately remove and dispose of dead
batteries from the product.
• Only use batteries (or rechargeable batteries)
that match the specified type.
• When inserting batteries, note the correct
polarity (+ and - markings) and insert the
batteries accordingly. Failure to do so could
result in the batteries leaking or exploding.
• Do not overcharge batteries.
• Keep batteries out of the reach of children.
• Do not short circuit the batteries/
rechargeable batteries and keep them away
from uncoated metal objects.

4. Getting Started

• Open the battery compartment (10), remove
the contact breaker and then close the battery
compartment (10).

5. Operation

5.1. Setting date/time automatically using
the DCF signal
• Once you have removed the contact breaker,
an acoustic signal sounds and the alarm clock
automatically starts searching for a DCF signal.
At the beginning of the search, the radio symbol
flashes. Once the alarm clock has found
a radio signal,
process can take 3 to 5 minutes.
• When the radio signal is received, the date and
time are set automatically and
continuously.
Display
Flashing
display
Flashing display
Display steady
(not flashing)
No display
appears and flashes. This
is displayed
DCF signal search
Active –
no reception yet
Active – not completely
received yet
Successful – signal is
being received
Error – signal search
ended
3