Refill Water - Philips HU4801/01 Benutzerhandbuch

Refill water

Water level can be observed through the
transparent water tank window.
1
Switch off the humidifier and unplug it.
2
Remove the upper unit by holding it at
both sides.
3
You can observe the water level through
the transparent water tank window. Fill
the water tank with cold tap water until
the water reaches the maximum water
indication level.
MAX
EN
10
Note
•
When filling water, do not exceed the maximum water
level, or water might leak from the drain hole and air inlets.
•
Do not shake the water tank when moving it, or water
might leak from the drain hole and air inlets.
•
Do not fill water through the air outlets on top of the
humidifier.
4
Place the upper unit back onto the water tank.