Edit Mode; Program Change - M-Audio Axiom AIR Mini 32 Benutzerhandbuch

Edit Mode

Edit Mode lets you reconfigure your Axiom's controls and functions in a variety of ways. Please see Edit
Mode Functions in the Appendix for a full-page illustration of all Axiom A.I.R. Mini 32 advanced functions,
which you can print and use as a quick visual reference.
Octave Buttons
By default, the Octave "+" and "–" buttons shift the keyboard's range up or down one octave at a time. Each
time you power up your Axiom, the octave setting will be at the default value of "0," and the buttons will be
red in color at half-brightness.
When you use the "+" button to raise the octave of the keyboard, it will either illuminate or flash at full-
brightness based on the octave chosen. The "–" will remain at half-brightness. Pressing the "–" button has
the opposite effect; it will illuminate or flash at full-brightness based on the octave chosen, while the "+"
button will remain at half-brightness.
Each octave is identified by color, as follows:
•
Dim red: 0 (default)
•
Green: +1 or -1 octave
•
Amber: +2 or -2 octaves
•
Red: +3 or -3 octaves
•
Flashing red: +4 or -4 octaves
Octave Button keys
The Octave buttons can also be assigned to control two additional MIDI functions: transposition and program
changes.
Transpose
You can also use the Octave "+" and "–" buttons to transpose the keyboard, raising or lowering its pitch by a
number of semitones (half-steps) as opposed to an entire octave. For example, if you are playing a song with
a singer that is having difficulty singing the top notes, you may want to lower the pitch by one or two
semitones. You can transpose the keyboard a maximum of two octaves in either direction.
To assign the Octave "+" and "–" buttons to the Transpose function:
1. Press the Edit button. It will illuminate to full-brightness.
2. Press the Oct = Transpose key. The Edit button will return to half-brightness, indicating the Octave "+"
and "–" buttons now control transposition (and that your Axiom is no longer in Edit Mode).
3. Now, you can press the "+" or "–" buttons to raise or lower the pitch, respectively.
Press both "+" and "–" simultaneously to return the keyboard to the default "0" transposition.

Program Change

You can also use the Octave "+" and "–" buttons to send MIDI Program Change messages, moving to the
next highest or lowest program between 0 and 127. Alternatively, you can use your Axiom's Program Change
button and the numerical keys (0–9) to enter a desired program number.
To assign the Octave "+" and "-" buttons to send Program Change messages:
1. Press the Edit button. It will illuminate to full-brightness.
2. Press the Oct = Program key. The Edit button will return to half-brightness, indicating the Octave "+"
and "–" buttons now send Program Change messages (and that your Axiom is no longer in Edit Mode).
3. Now, you can press the "+" or "–" buttons to move to the next highest or lowest program, respectively.
You can continue playing notes as you move through the programs to hear what each sounds like.
6