Totally Wicked arc pico Bedienungsanleitung Seite 12

Using your arc pico kit
TCR Mode (M1/M2/M3):
To configure TCR modes M1, M2
and M3, when the device is powered
off, hold the power button and the +
button simultaneously until you enter
the TCR configuration menu. Use
the + or – buttons to cycle through
M1, M2 and M3 modes and single
press the power button to select the
mode that you wish to configure.
Use the + or – buttons to increase or
decrease the TCR value depending
on your choice of coil material.
12