Care And Maintenance; Troubleshooting Guide - Cocraft LXC JS18 Original Bedienungsanleitung

Care and maintenance

• Keep the motor ventilation openings free from contaminants.
• Clean the jigsaw by wiping it with a damp cloth. Use only mild cleaning agents,
never solvents or corrosive chemicals.
• If the jigsaw is not to be used for a long time, the battery should be fully charged
before the tool is stored away.
• Store the jigsaw in a dry place out of children's reach whenever it is not to be used
for a long time.

Troubleshooting guide

The jigsaw • The battery is discharged. Recharge the battery.
won't start. • The overload or overheating protection has been triggered. Let the jig saw
rest and cool for a few seconds before resuming work.
• Faulty power trigger. Contact our customer services.
The jigsaw • The battery is discharged. Recharge the battery.
stops or is • The overload or overheating protection has been triggered. Let the jig saw
sluggish. rest and cool for a few seconds before resuming work.
• If the problem persists, make sure that the jigsaw is not overloaded.
Reduce the load.
• Is the task suitable for the jigsaw?
Responsible disposal
This symbol indicates that this product should not be disposed of with
general household waste. This applies throughout the entire EU. In order
to prevent any harm to the environment or health hazards caused by
incorrect waste disposal, the product must be handed in for recycling
so that the material can be disposed of in a responsible manner. When
recycling the product, take it to your local collection facility or contact
the place of purchase. They will ensure that the product is disposed of in
an environmentally sound manner.
11