Endress+Hauser Memosens CPS16D Betriebsanleitung Seite 11

CPS16D/CPS76D/CPS96D
8.4 Operational safety
► Before commissioning the entire measuring point, make sure all the connections are correct. Ensure
that electrical cables and hose connections are not damaged.
► Do not operate damaged products, and safeguard them to ensure that they are not operated
inadvertently. Mark the damaged product as defective.
► If faults cannot be rectified, the products must be taken out of service and secured against
unintentional commissioning.
8.5 Product safety
8.5.1 State-of-the-art technology
The product is designed to meet state-of-the-art safety requirements, has been tested and left the factory
in a condition in which it is safe to operate.
Relevant regulations and European standards have been observed.
8.5.2 Dispatch and storage
• Electrodes are individually tested prior to delivery and are supplied individually packed.
• Storage conditions: 10 to 30 ˚C (50 to 90 ˚F), dry rooms
• The 3M KCl solution in the transport protection cap prevents the electrode from drying out.
NOTICE
Frost below -5 ˚C (23 ˚F)
Electrodes crack if the internal buffer solution and/or internal electrolyte freezes.
► Use frost-proof packaging when transporting.
9 Identification
9.1 Nameplate
You can find the following information on the nameplate:
• Manufacturer details
• Order code
• Serial number
• Operating conditions
• Safety information symbols
Compare the order code on the nameplate with your order.
9.2 Interpreting the order code
To establish your device version, enter the order code from the nameplate into the search field at
the following address: www.products.endress.com/order-ident
Endress+Hauser
Identification
11