Bluetooth ® Headset - Renkforce 1214497 Bedienungsanleitung

Operating instructions
Bluetooth ® Headset
Item no. 1214497 black / 1214498 white
Intended use
The product is designed for the wireless transmission of speech from mobile
telephones and other devices that feature a suitable Bluetooth
transmission range is up to 10 meters in open spaces. The product features a built-in
rechargeable battery for approx. 72 hours standby operation.
For safety and approval purposes (CE), you must not rebuild and/or modify this product.
If you use the product for purposes other than those described above, the product may
be damaged. In addition, improper use can cause hazards such as short circuiting,
fire, electric shock etc. Read the instructions carefully and keep them. Make this
product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.
Delivery content
• Bluetooth Headset
®
• USB charging cable
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may
become dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
• Also observe the safety and operating instructions of any other devices
which are connected to the product.
• It is intended for indoor use only. Do not use it outdoors. Contact with
moisture, e.g. in bathrooms, must be avoided under all circumstances.
• The rechargeable battery is permanently built into the product and cannot
be replaced.
• Never damage the rechargeable battery. Damaging the casing of
the rechargeable battery might cause an explosion or a fire! Unlike
conventional batteries/rechargeable batteries (e.g. AA or AAA type), the
casing of the LiPo rechargeable battery does not consist of a thin sheet
but rather a sensitive plastic film only.
• Never short-circuit the contacts of the rechargeable battery. Do not throw
the rechargeable battery or the product into fire. There is a danger of fire
and explosion!
• Charge the rechargeable battery regularly, even if you are not using the
product. Due to the rechargeable battery technology being used, you do
not need to discharge the rechargeable battery first.
• Never charge the rechargeable battery of the product unattended.
Operating elements
5
4
connection. The
®
3
Charging the headset
Charging takes approx. 3 hours. The built-in rechargeable battery must be fully
charged for approx. 3 hours before first use. To charge the rechargeable battery,
proceed as follows:
• Connect the round plug on the included USB charging cable to the charging
socket (5). Connect the other end of the USB charging cable (USB-A plug) to a USB
port on your computer or a USB charging device.
• The LED indicator (2) lights up blue during charging.
• The LED indicator goes out when the rechargeable battery is fully charged.
Disconnect the USB charging cable from all connected devices.
Operation
a) LED indicators
Headset status
Standby operation after pairing
Incoming call
Low battery
Charging mode: Rechargeable battery
is charging
Charging mode: Rechargeable battery
is fully charged
• When charging, place the product on a surface that is not heat-sensitive.
It is normal that a certain amount of heat is generated during charging.
• Consult an expert when in doubt about operation, safety or connection of
the device.
• Maintenance, modifications and repairs are to be performed exclusively
by an expert or at a qualified shop.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
1
2
The fully charged rechargeable battery has sufficient power for approx.
3 hours of call time and approx. 72 hours of standby operation. The actual
times depend on the Bluetooth connection, settings, ambient temperature
®
and manner of use.
Headset and mobile device must be operated within the transmission range
of 10 meters. Please note that furniture, walls or electronic devices may
cause interference between the headset and your mobile device.
1 Call button
2 LED indicator
3 Microphone
4 Earphone
5 Charging socket
LED indicator
Blue LED blinks 1 x every 7 seconds
Blue LED blinks 1 x every 2 seconds
Blue LED blinks 3 x every 10 seconds
and acoustic signal (beep) sounds
Blue LED remains lit
Blue LED goes out