Commands; Mowing Plan - Viking MI 422.1 Gebrauchsanleitung

1. Commands (

11.5)
Main menu
Lock iMow
Switch automatic mowing on and off
Drive to docking station
Start mowing
Start time-delayed mowing
Skip next active time
Edge mowing

2. Mowing plan (

11.6)
Display weekly plan, edit active
times and mowing duration
3. Information ( 11.9)
Messages
Events
iMow status
Lawn status
Radio module status (MI 422 PC)
4. Settings ( 11.10)
iMow
Installation
Safety
Service
Dealer area
11.5 Commands
Select the required command using the
control pad and execute by pressing OK.
1. Main menu
124
2. Lock iMow
3. Switch on automatic mowing/Switch off
automatic mowing
4. Drive to docking station
5. Start mowing
6. Start time-delayed mowing
7. Skip next active time
8. Edge mowing
1. Main menu:
OK takes you back to the main
menu.
2. Lock iMow:
Activates the disabling
device.
Press the illustrated button
combination to unlock. (
3. Switch on automatic
mowing/
Switch off automatic mowing:
When automatic mowing is
switched on, the text "Automatic switched
on" appears in the status screen and the
automatic symbol is displayed next to the
battery symbol in the menus. The robotic
mower mows the mowing area fully
automatically.
When automatic mowing is switched
off, the text "Automatic switched off"
appears in the status screen and the active
times are shown as inactive (greyed out) in
the mowing plan. The mowing area is not
mown automatically. Mowing operations
can be initiated via the commands "Start
mowing" or "Start time-delayed mowing".
4. Drive to docking station:
The robotic mower travels back
to the docking station and
charges the battery. If automatic
mowing is switched on, the robotic mower
will mow the mowing area again at the next
possible active time.
5.2) 5. Start mowing:
The robotic mower starts the
mowing operation automatically
following activation. The end of
the mowing operation must be specified.
If a secondary area was installed, after
pressing the OK button it is necessary to
define whether mowing is taking place on
a secondary area or on the main area.
( 11.14)
The standard setting for the duration of the
mowing operation can be modified under
"Mowing time" in the machine settings.
( 11.11)
MI 422 PC:
Automatic mowing can also be
switched on and off using the app.
The robotic mower returns to the
docking station when automatic
mowing is switched off using the
app. ( 10.)
MI 422 PC:
The robotic mower can also be sent
to the docking station using the
app. ( 10.)
If an external docking station with a
corridor was installed, bring the
robotic mower to the mowing area
before activation of the command
"Start mowing".
MI 422 PC:
"Start mowing" can also be
activated in the app. ( 10.)
0478 131 9935 C - EN